I. Usage:
It is widely used for measuring the axial and disk products and parts, and mainly inspecting their radial bound, ellipticity and end surface differences.

II. Advantages:
1. Adopts granite instrument stand, and thus increases the accuracy of benchmark plane and decreases the self accuracy difference of the instrument.
2. The movable indicator stand of the gauge can be placed to any part of the indicator stand to perform measurement.
3. The indicator stand shall never get rusted, and is convenient to be used and kept.

III. Way of use:
Tighten the handle of the eccentricity axle, and fix the finial stand. Fix the moveable finial stand at the appropriate position according to the length of the tested part.Press down the ball head handle, put the part in, and fix the part with the two probes through the hole in the center of the part.Tighten the tightening handle, and fix the finial.Adjust the moveable stand of the gauge at the required position, and the inspection can be performed with coordination of the dial indicator (clock gauge).

IV. Accessory: One set of moveable stand of the gauge.

Technical Parameters